Shanghai Tankii Alloy Material Co., Ltd.

NAIA Member(Expired)

Grade: Nichrome 80/20
Chemical Composition: Nickel 80%, Chrome 20%
Electrical Resistivity: 1.09 ohm mm2/m
Max working temperature: 1200 C
Condition: Bright, Annealed, Soft
Wire diameter 0.015mm-1.0mm packing in spool
Rod, Bar diameter 1mm-30mm
Flat Wire, Ribbon, Foil, Sheet thickness 0.01mm~7mm, Width 1mm~1000mm
Plate: Thickness 2.5mm~7mm, width 10mm~500mm
Usually used as heating element, resistor.
Our advantage: Long working Life and anti-oxidation under high temperature

Detailed Description:

Grade: NiCr 80/20 is also called Chromel A, Nikrothal 80, N8, Nichrome V, HAI-NiCr 80, Tophet A, Resistohm 80, Cronix 80, Protoloy, Nikrothal 8, Alloy A, MWS-650, Stablohm 650, NCHW1.

We also produce other kind of nichrome resistance wire, such as NiCr 70/30,NiCr 60/15,NiCr 60/23,NiCr 37/18, NiCr 35/20, NiCr 25/20,Karma.

Product Description
Grade: Ni80Cr20 ,also called Nikrothal 8,MWS-650,NiCrA,Tophet A,HAI-NiCr 80,Chromel A,Alloy A,N8,Resistohm 80, Stablohm 650,Nichorme V,Nikrothal 80 etc.
with Whole Sale Price Ni70cr30 Wire Nicr70/30 Wire for Tubular heaters.

Chemical Content, %

Mechanical Properties

Temperature Factor of Electrical Resistivity

Product: Nickel Chromium Wire
Grade: NiCr 60/15
Chemical Composition: Nickel 60%, Chrome 15%, Iron balance.
Electrical Resistivity: 1.12 ohm mm2/m
Max contineous working temperature: 1150 C
Temper: Annealed
Diameter: Wire 0.02mm-1.0mm packing in spool
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm
Producer: Shanghai Tankii Alloy Material Co., Ltd.
NiCr 60/15 is also called Chromel C, Nikrothal 60, N6, HAI-NiCr 60, Tophet C, Resistohm 60, Cronifer II, Electroloy, Nichrome, Alloy C, Nikrothal 6, MWS-675, Stablohm 675, NCHW2
Chemical Composition and Properties

NiCr60/23 have excellent oxidation resistance at high temperature, good carbonization resistance, good resistance to oxidation sulfur atmosphere, and has good mechanical properties at room and high temperature as good resistance to stress corrosion cracking performance due to control the carbon content and grain size, Inconel 601 had a higher creep rupture strength, therefore it is recommended to use in the field of above 500 ºC.

Size:
Diameter: Wire 0.02mm-1.0mm packing in spool
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Characters:
(1) Have excellent oxidation resistance at high temperature.
(2) Good carbonization resistance.
(3) Can be a very good resistance to oxidation sulfur atmosphere.
(4) Has good mechanical properties at room and high temperature.
(5) Good resistance to stress corrosion cracking performance due to control the carbon content and grain size, 601 has high creep rupture strength, therefore it is recommended to use in the field of above 500 ºC.

Application Field:
(1) Tray, basket and fixture used in heat treatment factories.
(2) Mesh belt used in steel wire annealing and radiant tube, high-speed gas burner and furnace.
(3) Components of exhaust system.
(4) Combustion chamber of solid waste incinerator.
(5) Components of pipe supports and ash handling.
(6) Components of exhaust detoxification system.
(7) Oxygen re-heater.

Product: Heating Element Wire/Nichrome Wire/NiCrFe Alloy Wire
Grade: N40(35-20 Ni-Cr), Ni35Cr20Fe ,Chromel D, Nikrothal 40, N4, Chromax, HAI-NiCr 40, Tophet D, Resistohm 40, Cronifer III, 35-20Ni-Cr, Alloy D, Nikrothal 4, MWS-675, Stablohm 610.

Chemical Composition: Nickel 35%, Chrome 20%, Fe Bal.
Resistivity: 1.04 ohm mm2/m
Condition: Bright, Annealed, Soft
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Producer: Shanghai Tankii Alloy Material Co., Ltd.
The nichrome wire is usually used in tube heater, hair dryer, electric iron, soldering iron, rice cooker, oven, furnace, heating element, resistance element, etc.

Nickel Chromium alloy has high resistivity, good anti-oxidation properties, high temperature strength, very good form stability and weld ability. It is widely used in electrical heating element material, resistor, industrial furnaces, etc.

Size:
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Application of Different Grades:
Cr20Ni30:in solid hot plates, open coil heaters in HVAC systems, night-storage heaters, convection heaters, heavy duty rheostats and fan heaters.For heating cables and rope heaters in defrosting and de-icing elements, electric blankets and pads, car seats, baseboard heaters, floor heaters and resistors.

Mechanical Properties

Chemical Element: Cr 19~21.5%, Ni: Balance, Al 2.5~3.2%, Fe 2.5~20%
Resistivity: 1.33 ohm mm2/m
Resistivity 800 Ohms Per Circular Mil Foot at 20° C (68° F)
Wt. Per Cubic Inch =. 293 lbs.
Specific Gravity 8.10
Diameter 0.025mm~5mm
Usage: resistor

Size:
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Distinctive features of Karma resistance wire

1) Starting with Nickel Chromium electric heat wire Class 1, we replaced some of the Ni with Al and other elements, and thus achieved a precision resistance material with improved resistance temperature coefficient and heat electromotive force against copper.
With the addition of Al, we have succeeded in making volume resistivity 1.2 times greater than Nickel Chromium electric heat wire Class 1 and the tensile strength 1.3 times greater.

2) The secondary temperature coefficient β of Karmalloy wire KMW is very small, - 0.03 × 10-6/ K2, and the resistance temperature curve turns out to be almost a straight line within a wide temperature range.
Therefore, the temperature coefficient is set to be the average temperature coefficient between 23 ~ 53 °C, but 1 × 10-6/K, the average temperature coefficient between 0 ~ 100 °C, also may be adopted for the temperature coefficient.

3) Electromotive force against copper between 1 ~ 100 °C is also small, below + 2 μV/K, and exhibits excellent stability over a period of many years.

4) If this is to be used as a precision resistance material, low temperature heat treatment is required to eliminate processing distortions just as in the case of Manganin wire CMW.

Evanohm is a unique resistance alloy with high electrical resistivity and very low temperature coefficient of resistivity. The alloy is produced by melting and conditioning practices which result in a low level of pinholes at ultra-thin thicknesses. This combination of attributes with inherent corrosion resistance makes it suitable for a variety of strain gauge and foil resistor applications.

Size:
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Composition (Nominal)
75.00 Ni, 20.00 Cr, 2.50 Al, 2.50 Cu

Has been used extensively in fine sizes for precision wound resistors. Has a high tensile strength in fine sizes, a high resistance to corrosion and is nonmagnetic. Resistivity: 800 ohms - c mil/ft. Also available in strip form as well as wire and ribbon.

Pure Nickel Alloy Wire/Ribbon Ni200 Ni201 Ni212 0.025mm
Grade: Ni200,Ni201,N4,N6,Ni212
＊ High ductility
＊ Excellent corrosion resistance
＊ good mechanical strength
＊ Nickel foil and nickel strip for battery

Size:
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Alloy Description

Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip form for various applications including Ni-Cd batteries.

Condition of Supply

Nickel 200, 201 and 205 are supplied in the following conditions:
Cold Drawn, Special Temper.
Cold Drawn, Annealed. Straightened and Cut Lengths.

Note:

NUS N02201 (ASTM B 162) same as N4 (GB/T 2054).
NUS N02200 (ASTM B 162) same as N6 (GB/T 2054).

Pure Nickel Alloy Wire/Ribbon Ni200 Ni201 Ni212 0.025mm
Grade: Ni200,Ni201,N4,N6,Ni212
＊ High ductility
＊ Excellent corrosion resistance
＊ good mechanical strength
＊ Nickel foil and nickel strip for battery

Size:
Diameter: 0.018~30mm
Strip, Foil, Sheet Thickness 0.01-7mm Width 1-1000mm
Rod, Bar 1mm-30mm

Alloy Description

Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip form for various applications including Ni-Cd batteries.

Condition of Supply

Nickel 200, 201 and 205 are supplied in the following conditions:
Cold Drawn, Special Temper.
Cold Drawn, Annealed. Straightened and Cut Lengths.

Note:

NUS N02201 (ASTM B 162) same as N4 (GB/T 2054).
NUS N02200 (ASTM B 162) same as N6 (GB/T 2054).

Alloy 600
INCONEL (nickel-chromium-iron) alloy 600 (UNSN06600/W.Nr. 2.4816) is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability.

2.Detailed Description:
1) Heat treatment:
Normalized / Annealed / Quenched / tempered
2) Surface Treatment:
painting,plating,polishing,black oxide,transparent anti-rust oil
3) Quality control:
UT,MT,RT,PT,chemical composition test,mechanical property test,etc.
4) Inspection:
1. Raw material certificate(material chemical composition)
2. Heat treatment sheet report
3. Dimension inspection report 4, UT test report
5) Delivery condition:
Hot forged +Rough machined (black surface after Q /T)+ Turned
6) Competitive Advantage:
Quality control and management to the whole produce process, including ingot smelting, forging, heat treatment, machining and strictly final inspection prior to delivery.
Excellent product quality and service, competitive price, "in-time" delivery.

3. Regular size of Nickel alloy wire :
We supply products in the shape of wire,flat wire,strip.We can also make customized material according to useris requests.
Bright and white wire: 0.025mm~3mm
Pickling wire: 1.8mm~10mm
Oxidized wire: 0.6mm~10mm
Flat wire: thickness 0.05mm~1.0mm,width 0.5mm~5.0mm

Like Inconel 600, Inconel 601 has resistance to various forms of corrosion at high temperature and oxidization. However Inconel 601 has an addition of aluminum which give it high mechanical properties even in extremely hot environments.
Inconel 601 is used for industrial furnaces, radiant tubes, themocouple tubes, heat treatment equipments, baskets, petrochemical process equipments and aircraft components.

Chemical Composition

Specifications

Physical Properties

Regular size of Nickel alloy wire :
We supply products in the shape of wire, flat wire, strip. We can also make customized material according to user's requests.
Bright and white wire--0.025mm~3mm
Pickling wire:1.8mm~10mm
Oxidized wire:0.6mm~10mm
Flat wire: thickness 0.05mm~1.0mm,width 0.5mm~5.0mm

Inconel 625, a nickel-chromium-molybdenum alloy contains 9% Moly, serves effectively as both a corrosion resistant and heat resistant material. The combination of high-temperature strength and resistance to halogen attack, oxidation, and carburization has made alloy 625 a popular choice for chemical and petrochemical process equipment exposed to hostile, hightemperature environments.

The high alloy content of Inconel 625 enables it to withstand a wide variety of corrosive environments. The alloy is almost completely resistant to mild environments such as the atmosphere, fresh water and seawater, neutral salts, and alkaline media. In more severe environments, the combination of nickel and chromium provides resistance to oxidizing chemicals, and the combination of nickel and molybdenum provides resistance to reducing conditions. The molybdenum content also makes Inconel 625 highly resistant to pitting and crevice corrosion. The columbium stabilizes the alloy against sensitization and prevents intergranular corrosion. The high nickel content provides freedom from chloride stress-corrosion cracking.

Inconel 625 made by NiWire is made into chemical processing equipment, aircraft engine and airframe components, ship and submarine parts.

Chemical Composition

Specifications

Regular size of Nickel alloy wire :
We supply products in the shape of wire, flat wire, strip. We can also make customized material according to user's requests.
Bright and white wire--0.025mm~3mm
Pickling wire:1.8mm~10mm
Oxidized wire:0.6mm~10mm
Flat wire: thickness 0.05mm~1.0mm,width 0.5mm~5.0mm